Our stained barrel water butts can be purchased with a lift-off lid that has a thick hessian rope handle. They can also be purchased with a brass tap, a drainpipe diverter and a barrel stand as options. All barrel dimensions and capacities are approximate.

 

 

Best quality stock - Oak barrels are highly durable.
We have been in the barrel business for 20 years and only use the best quality barrel stock.

 

Water Butt Barrel Size:
56-gallon - Approximate capacity: 56 gallons (250 litres). Approximate height: 37" (92 cm). Approximate diameter at middle: 27" (68cm) to 29" (73cm).

 

Please ensure the size you choose is not too large for your access before ordering.

Please note that delivery charges will apply if barrels are returned because they are too large.

 

Rainwater barrels have the option of having a brass tap fitted near the bottom of the barrel. Brass taps are available in three different styles. The frog tap version includes a screw-on hose-tail to which a length of garden hose may be attached.

 

Oak barrel butts are also available fitted with wooden barrel taps. Three sizes of tap are available, i.e. 7" (17½cm), 8" (20cm) and 10" (25cm). The larger the tap the greater the flow of water.

 

Water butts can have either a loose lift-off lid or a fixed non-removable end. Either may be notched to allow entry of a drainpipe. Fixed ends are a safer option for children. We recommend fixed ends because they restrict air flow into the barrel and also trap moist air inside the barrel. This is beneficial for the barrel during hot, dry weather conditions. Reduced air flow also reduces the possibility of stagnant water effects.

Easy way to connect your water butt to a downpipe. This device diverts water from the downpipe to the water butt until the water butt is full. Any further water passes straight down the downpipe. No need for notches or lids. Barrel is supplied with a screwed connection point when purchased with a diverter.

 

Use a stand to lift the barrel off the ground increasing the clearance from the tap to the ground by an additional 4". This makes it sufficient for most buckets and watering cans. Our stands are made from pressure treated timber for long life.