Village Pump
Product Code: VP
£74.95
Add to cart
Product description
Village Pump
Working cast iron village pump often referred to as a P1 pump. The pump has a screwed 1¼" BSP fitting at the base such that a lift pipe may be fitted and four 11mm holes in the flange for mounting bolts (not supplied). When the handle is cranked water may be drawn from several feet. The position of the handle may be altered to be at the back or to one side by slackening its retaining bolts and rotating the handle to the desired position.
Approx. height 25" (63cm), base diameter 6¼" (16cm).
Buy Sundry Items for Village Pump HERE
Lift Pipe for Cast-Iron Pumps
PVC lift pipe for the village pumps having a male 1¼" BSP thread on one end and a plain open end at the other. This pipe will screw in to the base of our Village Pumps and our Pitcher Pumps. It is available in three lengths. The pipe is supplied in white but can easily be painted to the colour you desire. Use a saw to reduce the length to that which you require.
Cast iron stand for the Village Pump. The stand has a flange at the top suitable for fitting a Village Pump and has a base with four mounting bolt holes of 11mm in diameter. It may be used to give extra height to the village pump. The pump stand itself is hollow allowing a lift pipe for the village pump to pass through it.
Approx. height 27" (67cm), base diameter: 9½" (24cm).
