1. Home
  2. Barrel Products / Water Butts / Oak Barrel Water Butts / 40 Gallon Rustic Water Butt
40 Gallon Rustic Water Butt

40 Gallon Rustic Water Butt

Product Code: 40G-Rustic-Barrel-Butt

£146.95
















Add to cart

Product description

Our water butt barrels are made from genuine ex-distillery oak barrels that have been used for the maturing of spirit such as whisky and bourbon. They are similar to wine and beer barrels. Water butts may be supplied with one loose end that can be lifted off to allow access to the cask or they can be supplied with a cast-iron lift pump or a tap to allow water to be drawn from the barrel without removing the end. Our water butts present a practical and attractive means of collecting rainwater for the garden. All barrel dimensions and capacities are approximate.
 
Our water Butts are a fully recycled product with an ultra low carbon footprint. All of our Water Butts are refurbished and Buffed over to give a beautiful antique patina to the oak and hoop iron.
All hoops are nailed to prevent movement or slippage especially during hot weather.

Best quality stock - Oak barrels are highly durable and Barrel & Garden only use best quality barrel stock. We do not use surface coatings to cover deterioration on poor quality casks.

Promoted by The Environment Agency.
As seen on Carol Vorderman's Better Homes.
 
Please refer to barrel maintenance for more information. 

Water Butt Barrel Size:
Approximate capacity: 40 gallons (180 litres). Approximate height: 35" (88 cm). Approximate diameter at middle: 25" (62cm).
 

Please ensure the size you choose is not too large for your access before ordering.

Please note that dealivery charges will apply if barrels are returned because they are too large.
 
  Brass Taps
Rainwater barrels have the option of having a brass tap fitted near the bottom of the barrel. Brass taps are available in three different styles. The frog tap version includes a screw-on hose-tail to which a length of garden hose may be attached.
 
  Wooden Taps
Oak barrel butts are also available fitted with wooden barrel taps. Three sizes of tap are available, i.e. 7" (17½cm), 8" (20cm) and 10" (25cm). The larger the tap the greater the flow of water.
 
  Rainwater Barrel Lids
Water butts can have either a loose lift-off lid or a fixed non-removable end. Either may be notched to allow entry of a drainpipe. Fixed ends are a safer option for children. We recommend fixed ends because they restrict air flow into the barrel and also trap moist air inside the barrel. This is beneficial for the barrel during hot, dry weather conditions. Reduced air flow also reduces the possibility of stagnant water effects.

  Rainsaver Diverters
Easy way to connect your water butt to a downpipe. This device diverts water from the downpipe to the water butt until the water butt is full. Any further water passes straight down the downpipe. No need for notches or lids. Barrel is supplied with a screwed connection point when purchased with a diverter.
 
  Stands
Use a stand to lift the barrel off the ground increasing the clearance from the tap to the ground by an additional 4". This makes it sufficient for most buckets and watering cans. Our stands are made from pressure treated timber for long life.
 
 



Extremely satisfied with both goods and service. Would definitely recommend you to friends and would have no hesitation about shopping with you in the future. Ishbel Sloss
As featured on

Contact us

Barrel & Garden is a trading name of Northern Tubs Ltd.
Lady Park
Gateshead
Tyne & Wear
NE11 0HD

mailbox@oak-barrel.co.uk
UK National Sales 07526812713

Information

Articles

Sign up for deals

Facebook
© Copyright 2025 Barrel & Garden is a trading name of Northern Tubs Ltd. All Rights Reserved. l Sitemap