Use one of these watering posts, garden standpipes where you need a tap most. It can be fed via a hose-pipe either from your mains water supply or a pressurised rainwater supply.

 

They stand 900mm high and have a ½” BSP threaded tap outlet near the top so that any threaded ½” garden tap can be simply screwed into the post. The rear connection point also has a standard ½” quick coupler (attach photo) so that your garden hose can be easily attached and quickly disconnected and reconnected when required.

 

The post’s base plate can be buried in the ground where the post allowing the post to be situated in a garden border. The base can also be screwed via pre-formed sockets to any hard standing, block work or decking.

 

The post is ideal for use in rainwater systems with  a pressure sensitive Jet pump or for use with mains water.

 

Made from durable polyethylene with a textured wood effect finish and colour.

 

Dimensions: 100mm (39”) x 120mm (5”) x 120mm (5”).

Base plate is 240mm by 240mm.

Tap Connection: ½” BSP threaded tap connection point at height of 800mm.

Hose Connection: ½” snap quick coupler at the rear of the post.

 

Supplied with 1/2" brass bib tap

 

Weight: 3kg.

Material: Polyethylene.

Colours: Rustic Walnut.

 

Delivery 3 to 5 days