Rainwater harvesting systems are designed to store and redistribute rainwater, manufactured in the UK and designed for ease of assembly and use.

 

Our Aquarius Rain Harvesting Systems are available in one of three designs - Essentials, Garden and Home ranges.

 

Used and installed correctly, rainwater harvesting systems can significantly reduce domestic residences reliance on mains water and reduce household water bills.

They are ideal for the storage of rainwater in areas of low rainfall and those with water usage restrictions during dry periods, in these areas  rain harvesting can be extremely useful.

 

For use in garden irrigation, sprinkler systems or for simply washing vehicles the Garden System consists of:

 

HDPE tank made in the UK rotationally moulded for strength and durability.

Pedestrian rated access / inspection cover and frame.

Self cleaning filter for roof areas up to 500 square metres.

Self cleansing primary Aquatrio filter fully assembled.

Calmed inlet for improved aeration and enhanced water quality.

Diverton multistage submersible pump with sophisticated electronics for automatic stop/start when a pressure drop is sensed once the tap is turned on.

Overflow to purge system in flood conditions.

High pressure irrigation hose 25m included.

 

The under ground water storage tanks are available in sizes from 1200 litres to 6000 litres for this Garden Rain Harvesting System, tank colours may vary from those shown.

 

As an example a typical area of pitch or side of a roof on a detached or large semi would be around 35 to 50 sq m and would generate between 150 and 250 litres per hour of rainwater from an average U.K. storm. So our smallest 1200 litre unit would take around 4 to 8 hours to fill in constant rainfall. Once the tank is full it will go to overflow. This amount of water would give a reserve water supply from the system for use from a hose or sprinkler onto your garden or connection to a jet wash for around 3 to 4 hours, based on a large car wash machine using 450 litres per hour.

 

Installation of a rain harvesting system reduces the requirement for tap water, saving money where supplies are metered. More and more UK homes are being converted to metered supplies following the introduction of new government legislation that gives water companies the right to compulsorily meter their customers in areas of water scarcity. Storing rainwater for use in the garden is also environmentally friendly and can prove especially useful when hose-pipe bans are in force.

 

Please note these tanks are not suitable for the storage of drinking water.

 

 

Height of  tank: 1550mm (62").

Diameter of tank: 1260mm (49.5").

Cover diameter: 450m

 

Height of  tank: 1550mm (62").

Diameter of tank: 1260mm (49.5").

Cover diameter: 450mm (18").

2000 litre Garden System (445 gallons). £1265

Height of tank: 2135mm (85.4").

Diameter of tank: 1260mm (49.5").

Cover diameter: 450mm (18").

 

Height of tank: 2100mm (84").

Diameter of tank: 1560mm (61.5").

Cover diameter: 450mm (18").

 

Height of tank: 1940mm (77.6")

Diameter of tank: 2010mm (84")

Cover diameter: 450mm (18")

 

Height of tank: 2380mm (95")

Diameter of tank: 2150mm (86")

Cover diameter: 450mm (18")

 

Delivery 7 days