The three sections of this feature fit together to form a spectacular watercourse ending with a waterfall.

 

Manufactured from Rockways Ultralite polyurethane they are finished with a very realistic limestone appearance that will blend into natural surroundings. The three sections constitute a complete watercourse suitable for locating at the side of a garden pond.

 

The top section is an ULWL20 header pool, a ULWL21 section is used at the centre and a ULWL22 section forms the bottom part. The bottom section is shaped as a short vertical rock face from which water can fall into your base pond.

 

It is also possible to form two-piece waterfalls using either a ULWL20 with a WLWL21 or a ULWL21 with a ULWL22.

 

Although not absolutely necessary pond liner can be purchased as an option for use underneath the watercourse. By doing this the liner can collect any splashing water that escapes the preformed course and return it to the base pond. When using pond liner it is not so important to get the ground levels correct such that the sections fit together to form a completely watertight course. Two lengths of pond liner should be more than sufficient for this feature. When using two lengths the top piece can be simply overlapped over the bottom piece.

 

Complete 3-Piece Course:

ULWL20 + ULWL21 + ULWL22. Length: 240cm (95"). Width 110cm (43½").

Material: Rockways Untralite Polyurethane.